中山自流平地坪告訴您防靜電高架板
防靜電高架板的特點：
1、全鋼組成，機械強度高、承載能力強、耐沖擊機能好；
2、表面靜電噴塑，柔光、耐磨、防水、防火、防塵、防侵蝕；
3、粘貼的裝飾高壓層板，耐磨性及防靜電機能優良、抗污染、便于清洗、裝飾性強；
4、尺寸精度高、互換性好、組裝靈活、維修利便、使用壽命長；
5、地板可任意切割，安裝附件利便；
6、四邊固定，安裝利便；
7、下部空間可作為空調透風用，也可配汕頭家家樂家政公司合透風板調節底層透風量；8、對超重設備而言，只要在地板下增加支架，即能解決承載題目；
9、拆裝利便，只要更換裝飾貼面環氧地坪，就能重復使用；
10、安裝地插座時可根據地插座的規格進行開孔。合用范圍：全鋼地板合用在載重要乞降防靜電要求較高的場合，好比有大型服務器和機柜的主機房；大、中、小型的計算機機房，以交換機為代表的通訊中央機房、各種電氣控制機房、郵電關鍵和用計算機控制的軍事、經濟、國家安全、航空、航天及交通指揮調度和信息治理中央等環節。
China's first floor paint binders mainly composed of resin, its type is as follows:
(1) polyurethane resin: it is made of isocyanate with polyester, polyether, epoxy resin, castor oil and its processing products containing hydroxyl thermoplastic polymers such as cellulose acetate butyrate formula, made into many kinds of polyurethane coating. Such as TDI and MDI and polyether with is the first basic material of elastic coating on the ground; HDI and polyacrylic acid resin containing B hydroxyethyl blending, is the basic material of high-grade floor coating.
(2) the epoxy floor paint grease used for floor coating, often with low molecular weight polyamide resin curing, the epoxy resin on the floor with a seamless coating material on the ground, the other type of exterior wall coating first base.
2 must be film-forming substances
Must not film-forming material also is the main form of coating is local, but it means less separate primary film forming substance alone into a film. This component is used in coating for paint. In apply for to participate in the paint, not only make coating function improvement, and make the paint types.
3 for film forming material
Assisted the film-forming material means less composition of coating or not the body of the coating, but for the coating of the film-forming process has a great influence, or some adjuvant effects on the function of the coating. For solvent and assisted the film-forming material first.
http://www.www.reperis.com.cn/07ir/04e9-14.htm |
